<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=152291952160361&amp;ev=PageView&amp;noscript=1">
circle
New

New Versalift SST-40-EIH on New Ford F-550

Stock # BM-3830
Available

Contact For Price/Rate

Request a quote

Features and Options

Features

? Standard platform capacity of 350 lbs. (158.7 kg). ? VERSALIFT TruGuard™ dielectric isolating system with right hand single stick control. All control handles are isolated and tested per ANSI 92.2. The high resistive dielectric system is protected from direct environmental and job related contamination. TruGuard™ technology incorporates the use of full hydraulic controls with durable metal handles and linkages. ? 180° hydraulic platform rotator. ? Full pressure turret mounted lower controls including override. ? Engine start/stop system with controls at platform and lower controls. ? Continuous unrestricted rotation including three pass collector ring. ? Five GPM (19.0 LPM) open center hydraulic system. ? Chassis insulating system (lower boom insert) including fiberglass compensation link providing 12 inches (0.30 m) insulation gap. ?Fiberglass inner boom and patented ELECTROGARD providing 42 in. (1.07 m) insulation gap fully retracted meeting ANSI A92.2 requirements for Category C, 46 KV and below. ? Hydraulic tool power at bucket. Quick disconnect couplers not included. ? ELECTROGARD and inner boom finished with white urethane paint over white gel coat. ? Integral hydraulic oil reservoir with dual sight gauges and 15 gal. (56.8 l) capacity. ? End mounted closed 24 in. x 30 in. x 42 in. (0.61 m x 0.76 m x 1.07 m) fiberglass platform with one step, liner and cover. ? Master/slave hydraulic leveling with upper control to tilt for clean-out and rescue. Leveling control at lower controls. ? Non-lube bearings used at all pivot points. ? Multi-link hose carrier system through booms. ? Boom cradle and ratchet type tie down strap. ? Automatic throttle control. ? 12 volt DC backup pump providing power to all boom functions. ? Mounting hardware for chassis/cab installation. ? Full body harness and lanyard. ? Painted standard white urethane. ? Two operator's manuals and two service manuals. ? ANSI A92.2 data plate.

Included options

Dakota Steel Bed132” long x 40” high x 94” wide service body including the following: • 30 inch tread plate platform extension • LED lighting package installed in tail shelf with additional cutouts for strobe lights • Cable access step at rear and side access. • Two (2) chrome grab handles at side access and two (2) pool type grab handles for rear tail shelf. • Wheel chock storage with pendulum retainers and outrigger pad holders. • Master door lock hook and loop system on each door with two (2) spring loaded door handles. Excludes 1st vertical curbside • Grey Zolatone paint on the interior of compartments. • 40” High Street side compartments as follows • 1st Vertical: Two (2) adjustable shelves with dividers and cutout for outrigger • 2nd Vertical: Two (2) adjustable shelves with dividers • Horizontal: One (1) removable shelf with dividers • Rear Vertical: Two (2) adjustable shelves with dividers • Hot stick shelf with rear access door. • 40” High Curbside compartments as follows • 1st Vertical: Two (2) adjustable shelves with dividers and cutout for outrigger • 2nd Vertical: Gripstrut access steps to bed area with removable composite side gate. • Horizontal: One (1) adjustable shelf with dividers • Rear Vertical: Five (5) fixed material hooks 1-3-1Installation to include the following: • Install VERSALIFT SST-40-EIH, mounting hardware, PTO and pump. • Install rear torsion bar and ballast • Install and paint service body and accessories. • Install combination pintle hitch with 2"ball, D rings and 7 prong trailer connector • Install two (2) amber strobe lights in tail shelf and two (2) strobes lights in front grill • Install mud flaps, back up alarm and park brake interlock system. • Furnish fire extinguisher, 3-piece triangle reflector kit and wheel chocks. • Test ride completed unit for 1 hour. • Test and certify per ANSIA92.2

Product Specs

  • Location : Houston, TX
  • Ton Rating: 0.22
  • Boom (ft) : 45
  • Type : Aerial Lifts
  • Engine : Ford Power Stroke
  • Transmission : TorqShift
  • Suspension : Spring
  • Hi-Rail : No

What Customers Are Saying

All I ask from any vendor of ours is to deliver quality work in a timely manner. CraneWorks delivers!
- Landon G.

What Customers Are Saying

The team at CraneWorks could not have been more helpful and professional. They followed through on every commitment and have continued to be an excellent resource after the sale.
- John H.

What Customers Are Saying

A great group of people with skilled technicians who know how to take care of equipment.
- Dan

What Customers Are Saying

If you need a new truck go to these guys, you will be taken care of 110% every time. These are great people and I plan on buying more trucks from them.
- Root Tree Service

What Customers Are Saying

Very great people to deal with. Prompt and professional on every level.
- Ben S.

What Customers Are Saying

Great people, they go above and beyond, and make me feel good about the hands our equipment is in.
- Garrett S.

What Customers Are Saying

Had an on-site breakdown, the tech showed up quickly and was very knowledgeable. He had us up and running in no time. Great service, will use in future for any repair I need.
- Terry S.

What Customers Are Saying

Delivered right on schedule, despite all the Covid-19 issues. Always answered calls or emails with real-time updates and pictures.
- Joseph P.

Equipment at Houston, TX

circle
Versalift

Versalift

As an ISO9001- certified quality standard company, Versalift remains focused on continually creating solutions that enhance job safety and efficiency, to provide safe, reliable, high-quality aerial lifts that stand the test of time. Whether purchasing one Versalift bucket truck or a fleet, Versalift’s family of distributors prides itself on top-notch service, whether that is for sales, maintenance, parts, or support.