Features and Options
FeaturesBoom: Full power telescoping cylinder with integral holding valve. Three (3) quick reeve cast iron sheaves.
Boom Elevation: One (1) double acting hydraulic lift cylinder with integral holding valve. (-10° to +80°).Rated Capacity Limiter System: RCL displays information on boom length and angle, working radius, rated load and total weight being lifted. Includes WADS & Internal anti-two block wiring.
Controls: Dual side stand -up operators stations, dual engine throttle (electronic pedals), horn and engine start/stop.
Swing: 375° non-continuous rotation with adjustable swing drive.
Hydraulic System: Open center type consisting of a fixed displacement, three section, high pressure pump supplies oil to the main control valve and winch control valve. Reservoir capacity
100 gallons (378,5 L), 10 micron return line filter. Ball valve on main suction line.
Hoist: Single speed planetary winch. Bare drum pull 10,380 lbs (4.708 kg), low speed.
Wire Rope: 325 ft (99,1 m) of 9/16" (14 mm) rotation resistant wire rope. Single line pull 7,700 lbs (3.492,6 kg).
Miscellaneous Standard Equipment: Outrigger motion alarm, Owner's manuals, Outrigger monitoring system. Flatbed. Outriggers are provided with 20" (508 mm) dia. polymeric removable pads. Hydraulic reservoir, Torsion box (frame), inner outriggers and inner boom sections.
Included options• 20-ton (18,1 mt) standard mount HO outriggers with stowable aluminum floats 17.3' (5,28 m) full span/ 10' (3.04 m) mid span, 180°stable unit with torsion box for a 20' (6,1 m) flatbed, rear underframe mounted RSOD stabilizers 16' (4,8 m) span.
• Removable outrigger floats included.
• 24' -80' (7,3 -24,4 m) four section, full power telescopic boom
• Two-and three -part reeving, 12.5-ton (11,3 mt) capacity hook block with one sheave